This ultrasonic multi-layer coating thickness gauge is built on the pulse-echo ultrasonic measurement principle, delivering non-destructive dry film thickness (DFT) testing for concrete, polyurea, polyurethane, plastic, wood, and glass substrates. Its pluggable probe design allows one main unit to support multiple probes simultaneously, with intelligent automatic probe-type identification.
Probes of different frequencies serve different industries. Two ultrasonic probe types are currently available, covering both non-metallic surface coatings and thick coatings on concrete.
| No. | Probe Model | Ultrasonic Frequency | Probe Face Diameter | Application Industry |
|---|---|---|---|---|
| 1 | 15M-X0 Probe | 15 MHz | Φ6 mm | Surface coatings on non-metallic substrates such as plastics, wood, and glass |
| 2 | 2.5M-X0 Probe | 2.5 MHz | Φ10 mm | Coatings on concrete surfaces, e.g. polyurethane, polyurea, etc. |
The probe emits a high-frequency ultrasonic pulse that travels through the coupling agent (with negligible delay) and enters the coating. Upon reaching the interface between coatings of different densities, part of the ultrasonic wave is reflected back as a new pulse, while the remainder continues through the material. The reflected pulse is received by the probe sensor. The instrument then processes the signal to determine the ultrasonic propagation time within the coating and accurately calculates the coating thickness.
| Parameter | 15M-X0 Probe | 2.5M-X0 Probe |
|---|---|---|
| Probe Frequency | 15 MHz | 2.5 MHz |
| Probe End Diameter | Φ6 mm | Φ10 mm |
| Measuring Range | 13 – 5500 μm (sound velocity 2200 m/s) | 50 – 8360 μm (sound velocity 2200 m/s) |
| Sound Velocity Setting Range | 1000 – 9999 m/s (default: 2200 m/s) | |
| Layer Thickness | 50 μm | 500 μm |
| Measurement Accuracy (H = actual coating thickness) | ±(3 μm + 3%H) | ±(20 μm + 3%H) |
| Resolution | 1 μm | |
| Optional Units | μm (default), mil | |
| Probe Dimensions | Φ22 mm × 60 mm | Φ25 mm × 65.2 mm |
| Host Dimensions | 141.7 × 91.1 × 22.6 mm |
| Display | 800 × 480 dot-matrix IPS color screen |
| Instrument Weight | 475 g |
| System Language | Simplified Chinese, English |
| Power Supply | 3.7 V 4000 mAh rechargeable lithium battery |
| Charging Interface | USB (Type-C) |
| Supply Voltage | DC 5 V |
| Operating Temperature Range | 0 ℃ – 50 ℃, 0 – 85% RH (no condensation) |
| Storage Temperature Range | -10 ℃ – 60 ℃, 0 – 85% RH (no condensation) |
| Probe Connection Method | Push-pull self-locking (snap-on) connector |
| Operating Current | 447 mA |
| Operating Power Consumption | 1475 mW |
Familiarize yourself with the main unit layout, probe connector, display, and control interface before first use.
Apply the coupling agent evenly to the surface of the material to be measured. Firmly press the probe onto the coated surface and hold it steady. When the buzzer sounds, the measurement is complete and the coating thickness is displayed.
Thickness measurement results for 3 layers are shown on the instrument display.
Configure the following parameters before measurement to ensure accuracy:
The aviation plug connector has a spring limit and cannot be rotated or pulled violently. Refer to the operation diagram for correct connection.
The ultrasonic thickness gauge can be connected to a computer via USB and operated with dedicated PC software. The software supports real-time measurement synchronization, measurement data reading, and data export to Excel, among other functions.
| No. | Description | Quantity | Unit |
|---|---|---|---|
| 1 | Ultrasonic Thickness Gauge | 1 | pcs |
| 2 | Ultrasonic Probe | Number of probes ordered | — |
| 3 | USB Cable | 1 | pcs |
| 4 | Fluid Coupling | 1 | pcs |
| 5 | User Manual | 1 | pcs |
| 6 | Calibration Report | 1 | pcs |