Carbon Steel Butt Weld Test Specimens with Artificial Defects for PAUT TOFD UT Training & Assessment

1 piece
MOQ
Carbon Steel Butt Weld Test Specimens with Artificial Defects for PAUT TOFD UT Training & Assessment
Features Gallery Product Description Chat Now
Features
Specifications
Applicable Testing Method:: PAUT, TOFD, Conventional UT / Angle Beam UT
Material:: Carbon Steel (CS)
Specimen Type:: Flawed Butt Weld Specimen With Offset V‑Groove
Defect Feature:: Artificial Implanted Welding Defects
Purpose:: NDT Personnel Training, Practical Assessment, Procedure Validation & Equipment Setup
Highlight:

Carbon Steel Butt Weld Test Specimens

,

PAUT TOFD UT Training Specimens

,

Ultrasonic Calibration Blocks with Artificial Defects

Basic Infomation
Place of Origin: CHINA
Brand Name: TESTECH
Certification: ISO, CE
Payment & Shipping Terms
Packaging Details: In carton or wooden
Delivery Time: 5-8 workdays
Payment Terms: T/T,Western Union,Credit card,PAYPAL
Supply Ability: 100 piece
Product Description
Product Overview

Custom carbon steel flawed weld specimens of the ANS series are engineered primarily for PAUT (Phased Array Ultrasonic Testing), TOFD (Time-of-Flight Diffraction), and conventional UT. These specimens are widely used for NDT personnel training, practical assessment, and procedure validation.

The specimen features a 15 mm plate thickness with an offset V-groove (35°) and embeds four typical critical planar welding defects: CP (Cold Lap), IP (Incomplete Penetration), LF (Lack of Sidewall Fusion), and CR (Central Weld Crack).

Key Specifications
Type 12 mm thick carbon steel butt weld specimen with offset V-groove (V offset)
Groove Parameters 35° V-groove, root gap 2 mm, root height 2 mm
Dimensions 200 × 200 × 12 mm
Embedded Defects 4 types of typical artificial implanted welding defects (see below)
Embedded Artificial Defects
  • IP — Incomplete Penetration: Planar defect at the root region.
  • CENTER CR — Central Weld Crack: Planar defect located at the weld centerline.
  • LF — Lack of Sidewall Fusion: Planar defect along the weld sidewall.
  • SL — Slag Inclusion: Volumetric defect embedded within the weld metal.

The specimen covers both critical planar defects and volumetric defects, making it one of the most common training and examination specimens for weld ultrasonic testing.

Applications
  • Personnel training and practical exercises for PAUT (Phased Array Ultrasonic Testing), TOFD (Time-of-Flight Diffraction), and conventional angle beam UT.
  • UT/PAUT procedure validation, equipment setup, and defect sizing examination — including height sizing, length measurement, and defect location.
  • Assessment of both critical planar defects and volumetric defects in weld ultrasonic testing.
Recommended Products
Get in touch with us
Contact Person : Linda
Tel : +86 13488765676
Characters Remaining(20/3000)